MISUMI is introducing an extensive new line of miniature linear guides that offer high rigidity, smooth operation and dynamic load capacity in small footprints. Available for delivery in six days of less, the guides can be custom ordered. Short block, long block, wide rail, heat resistant and interchangeable block are a few of the categories that engineers can choose from in either one or two block designs in extremely wide parameters. Standard applications are well served by the carbon steel guides, while the corrosion resistant stainless steel guides are ideal for high temperature or high humidity environments.

MISUMI of the Americas, Inc.

Hoffman introduces AEGIS™ Enclosures, a new line of IEC-style wall-mount enclosures exclusively available in Canada and Latin America. Aegis wall-mounts deliver a versatile, true metric solution and global styling for a wide variety of environments including OEMs, automotive, packaging and material handling. The Aegis line includes 67 small-to-medium-sized models in three different configurations -- hinged door wall-mount, hinged door wall-mount with gland plate and screw cover wall-mount -- each with a galvanized subpanel. Accessories are also available.

Hoffman

The MemoSens pH sensor digitally stores production and calibration data and documents current sensor properties such as serial number and date of manufacture. The traceability of all important data for technical production is ensured. Field calibration right at the measuring point is no longer necessary because the sensor can be pre-calibrated in the laboratory and retains its calibration in the field. As soon as it is plugged into the transmitter, MemoSens identifies itself and is ready for measurement. MemoSens can be connected to the Liquisys and Mycom families of transmitters, and there are hazardous and non-hazardous versions. Special conversion kits allow it to be connected to existing transmitters.

Endress+Hauser Canada Ltd.

The Quantum series harmonic drive gearhead size 14 delivers 50% more torque than the CSF series while maintaining zero-backlash, 1 arc-min positional accuracy and ±5 arc-sec repeatability. The Quantum Series size 14 gearhead has an outer diameter of 73mm and is just 41mm in length. It has a rated torque of 89 in-lbs and a maximum torque of 621 in-lbs. It is available in gear ratios 50, 80 and 100:1.

HD Systems, Inc.

Hannay Reels' N400 Series welding reels are designed to improve the efficiency of welding operations. The reel handles 1/4" or 3/8" oxygen/gas hose in lengths of up to 100 ft., and features two swivel joint inlets and two outlet risers to handle twin gas welding hose. The narrow frame design is ideal for limited space mounting.

Hannay Reels, Inc.

Waterloo® now offers Magnum® series 46-inch and 56-inch chests and carts in three colours: iron blue, black and red. The three colours are available in the 10-drawer MG4610 and MG5610 chests and 12-drawer MG412 and MG5612 tool carts as well as in select storage units in the Traxx® series. Each Magnum® series tool unit has roll-cage construction, the Posi-Latch™ drawer securing system, full-extension, heavy-duty ball-bearing slides, a high-security lock system and 14-gauge steel support casters.

Waterloo Industries, Inc.

The White sensor tester transforms the way maintenance staffs and mechanics test and troubleshoot hydraulic motor speed sensors and pulse detection systems. The patent-pending Sensor Tester is easy to use and simplifies the troubleshooting process. It lets any mechanic know what part of the speed control system is malfunctioning in a matter of seconds. The tester is designed to test Hall effect and optical (Mini Beam) sensors. It is also able to test more low voltage (4.5 to 24VDC) sensors that make and break contact per pulse. The Sensor Tester is made of flame-resistant ABS plastic and comfortably fits in a hand. 

White Hydraulics, Inc.

Keeping industrial devices secure and under control is assured with the newest safety switch PSEN 2.2 with a cylindrical design, which provides a long switching distance of eight millimeters. This non-contact, magnetic safety switch is used for position monitoring and safety gate monitoring. The benefits of the long switching distances on the PSEN 2.2 are a high lateral offset, providing tolerant dimensions for installation and insensitivity towards spring-back or swinging from  safety gates.

Pilz Automation Safety L.P.

The vacuum-assisted run-dry, dry-prime, re-prime, high performance centrifugal pumps are available for solids handling or clear liquid service. Typical mounting configurations are engine driven for skid or trailer mounted packages and electric driven, enclosed silent packages available with DBA ratings to 70 DBA @ 10 feet. Pumps are also available in a variety of different metallurgies.

York Fluid Controls Limited

ASCO expands its 8290 Angle Body Piston Valves product line to incorporate the Miniature 32mm Operator, Proportional Valve and HS Linear Position Indicator. The 32mm Operator angle body valve is the smallest construction of this type, and covers 3/8", 1/2" and 3/4" pipe sizes. It provides excellent flow and pressure capabilities in an extremely small package. The 8290 proportional valve incorporates compact positioner technology to provide proportional control of fluids. Available for NC entry under disc, 50mm through 125mm operators. The HS2, 3 and 4 linear position indicators can be supplied with two mechanical or viper switches and mount on top of the 8290 valve operator in place of the standard visual indicator.

ASCO Valve Canada

SV busbar systems are designed for power distribution needs ranging from 250A to 3000A. The systems are available with either flat copper busbar or Rittal profile busbar. The profile busbar is already cut to length to suit the enclosure. The SV busbar system is designed so that system designers and manufacturers can quickly and simply build their own power distribution systems in-house cost effectively.

Rittal Systems Ltd.

The domnick hunter PNEUDRI ranges of compressed air dryers feature not only commonality of parts, modular construction, compactness and lightness, high operating and energy efficiencies but also the concept of "multi-banking." Modular construction allows additional expansion of a dryer package by multi-banking individual units which enables isolation of individual units for service and maintenance, while maintaining a continuous supply of dry and clean compressed air. Multi-banking also satisfies any future increase in compressed air demands. PNEUDRI will purify and dry compressed air from 3 cfm, upwards, across a working pressure range from 58 psi g to 152 psi g although some of the ranges have a working pressure of 232 psi g.

domnick hunter

This new generation work boot is 100% metal free and is designed to maximize comfort and safety and minimize inconveniences such as triggering metal detectors. The interior of Dakota's work boot is CSA International certified with Grade 1 toe protection designed to withstand a minimum of 125 joules of impact energy. Made with composite materials -- a proprietary blend of resins and fibres -- the toe weighs in at 75 grams, or 30 percent lighter than a steel toe. For total foot protection a composite plate replaces the traditional steel plate and runs the length of the boot. The penetration-resistant sole plate is also 100% non-metallic and magnetic free. The new boot also features a removable foot-bed which is contoured and provides cushioning and support.

Mark's Work Wearhouse Ltd.

Bausch & Lomb is introducing its redesigned illuminated stand magnifier. The new design offers versatility across a number of different uses for a variety of applications in industry and laboratories. The newly designed magnifier features an adjustable 2-inch x 4-inch lens, which provides a wide field for close up viewing, a 5x inset lens, low voltage wall mount transformer and UL listing.

Bausch & Lomb

These new precision indexing plungers come with an attractive knob handle for convenient retraction. Available in threaded-body and mounting plate versions. Both versions come in a choice of either a locking type, which locks in retracted position by turning 90°, or non-locking type, which stays extended by spring force except when manually held in retracted position. Several sizes are available. The new knobs offer high strength and durability in an extremely compact assembly. The knob is made of matte black fiber-reinforced nylon thermoplastic, the plunger is made of heat treated steel and the body is steel with black oxide finish.

Carr Lane Mfg. Co.

The A-32 was designed for tapping small sizes. The unit's all bearing construction allows the operator to easily line up over the hole. With a working range of 11" to 34", the A32 stays perpendicular anywhere it is moved on the table. With a 400 rpm pneumatic motor on the unit, the A32 has the capacity to tap up to 9/6" (M14) in steel.

FlexArm

Deb Naturelle™ Hair and Body shampoo displays the Ecolog® mark. Formulated specifically for the industrial market, this range is ecologically sensitive, NPE and CDE free. The Sunflower Heavy Duty Hand Cleanser removes oil and is solvent free. Hair and Body Shampoo is a clear, viscous aquamarine gel which contains a unique blend of surfactants. Universal Cream moisturizes and protects the  skin from day-to-day and industrial irritants.

Deb Canada

Omron's new D4GL plastic body locking safety door switches offer a variety of functionality for machine builders and end users. Up to five contacts with six different contact configurations, with three contacts actuated by the operating head and two actuated by the solenoid. This allows for complex monitoring of switch condition. Highly visible red operating head rotates in four different directions allowing for increased mounting flexibility with eight different entry positions. The D4GL can be used on a variety of machine tools, conveyors, packaging and material handling equipment where there is a safety door, gate or cover protecting the operator from accessing running machinery.

Omron Canada Inc.

The SLA from Robohand is a 1, 2 or 3-axis ball screw actuator complete with onboard electrical and pneumatic controls and field programmable software. The SLA is designed for applications requiring a high degree of repeatability and is ideal for screwfeeding, fluid dispensing, pick-and-place, as well as many other applications.

Wainbee Limited

Known as the CR 10, 15 and 20, the new medium-sized CR pumps narrow the interval between pump sizes even further. Changes include the introduction of a unique cartridge seal. All the seal components are placed within a single cartridge unit. This makes the seal more reliable and hard-wearing and when the time comes, it can be replaced in minutes. Available as an optional feature, the Grundfos LiqTec sensor constantly checks that there is liquid in the pump. If it runs dry, the pump is instantly stopped, thereby eliminating the risk of damage from dry-running altogether. The pumps come in several basic materials to suit their intended use: AISI 304/Cast Iron and all-AISI 304 stainless steel for water and non-corrosive liquids, and all-AISI 316 stainless steel for  aggressive liquids.

Grundfos

The EZ-mix® HI Dispenser is a cordless, motorized hand gun for standard 50 ml two-component cartridges that is effective for dispensing highly viscous adhesives out-of-doors, at below freezing temperatures. Featuring a hardened steel drive mechanism and variable speed dc motor, with a torque limiter for overload protection, this rugged tool is powered by a 6V NiMH battery that operates at 100% capacity down to 0°C and even 90% at ­10°C. It has a light-touch trigger to eliminate repetitive squeezing and a speed control knob which lets users match the dispense rate to the viscosity of their material and application.

DTIC Dispensing Technologies

DryLin R plastic linear bearings are made with iglide® J polymer material which requires no lubrication or maintenance. DryLin S anodized aluminum shafting is optimized for friction and wear to work seamlessly with DryLin R bearings. Together, this complete motion control solution is rust-free, contamination-resistant and will not corrode. DryLin solutions are ideal for extreme dirt conditions and underwater, food and washdown applications. DryLin R linear bearings are available in a complete range of sizes and they are dimensionally interchangeable with standard, re-circulating ball bearings. DryLin S shafting can be customized with flats, grooves, through-holes or other modifications.

igus, inc.

The Kee Lite® -- models L29 and L30 -- slip-on aluminum pipe fittings are angled and adjustable for use in the construction of stair rails and other safety railings, and are available to fit standard pipe size 7 and size 8 for 1 1/4" and 1 1/2" diameter pipe respectively. Model L29 is most frequently used for struts and braces. It may be adjusted for any desired angle between 30 and 60 degrees. Model L30 is designed for use as a slope between the mid-rail and an intermediate vertical upright. It can be adjusted for any desired angle between 30 and 45 degrees.

Kee Industrial Products, Ltd.

IDS-20000ARH industrial dispense pump is developed for industrial production and process applications requiring maintenance-free, precision, low volume fluid control. It is CE approved and integrates the CeramPump® valveless piston pumping principal with precision stepper control. This unique pump design accomplishes all fluid control functions while eliminating valves which can clog, fatigue and fail, causing accuracy drifting and pump failure over time. The electronics feature precision stepper motor control, multiple dispense and continuous modes and will interface with a PC or PLC. Typical applications include chemical and pharmaceutical processing, electronics and semiconductor manufac  turing, metal finishing, food processing and packaging, and process instrumentation.

Fluid Metering, Inc.

Guyson's model RSSA-6M rotary spindle-blast system is specially adapted for semi-automatic or manual operation in aggressive surface modification work such as etching, texturing and profiling. The dual-mode blast machine has an extensive list of abrasion protection features that help to ensure a long service life in production blast finishing. Fitted with an extra blast gun and blow-off nozzle for hand held use, the modified blast cabinet has an additional view window and armholes for manual blasting. Electronic interlocks disable the automated operation of the system when the armhole covers are open. The standard cabinet has a single full-depth side access door and is frequently equipped with an automatic loading door at the front.

Guyson Corporation

SGE series safety contact strips and UM series pressure-sensitive safety mats are now available in yellow for enhanced visibility and worker safety. The safety contact strips feature moulded end caps as well as wiring plugs that are inserted into the safety contact for simplified assembly. The safety contact is housed in and protected from damage by an outer covering of non-conductive rubber that allows actuation angles up to 90°. SGE series safety contact strips can be used to safeguard  many hazards, including gates, doors, machines and scissor lifts. UM series safety mats are available in more than 150 standard and metric sizes.

Scientific Technologies Inc.

This Teflon® diaphragm relief valve with an intrinsic flange is designed for use with lined steel piping. The all-thermoplastic valve provides the rigidity and high purity required for lined pipe, eliminating the need for heavier and lined metal valves. By making the flange an integral part of the thermoplastic body, it eliminates piping nipples and other threaded connections. The Teflon diaphragm and plastic body combine to provide a non-leaching, contamination-free relief/by-pass valve.

Plast-O-Matic Valves, Inc.

The PPD-130 peristaltic pump dispenser provides "volumetric" dispensing of low-viscosity materials such as cyanoacrylates, oils and solvents without the need for compressed air. It uses peristaltic pump technology to dispense material directly from its original packaging. By eliminating the need to transfer the material from its original packaging, the risk of material contamination and operator contact is reduced. The suck-back feature reverses the pump after dispensing to prevent material from dripping between cycles and also allows the material tube to be emptied when dispensing is complete. Dispensed amounts may be controlled manually or with  the built-in timer.

I&J Fisnar Inc.

These LED bulbs for ABB's line of CBK, CBG and Compact pilot devices, are ideal for illuminated pushbuttons, switches, pilot lights and emergency stop buttons. The are available for voltages of 48, 60, 110-130VAC/DC as well as 12VDC. These LED bulbs are available in red, green, yellow, blue or white. The KPR series switch reset buttons are available in six different colours with different text or blank. They may be ordered with a black plastic or metal bezel. The KPR3 provides a flush button appearance, while the KPR4 provides an extended button appearance. A flexible joint is also available to avoid damage to the shaft.

ABB

The Flexello JA series swivel jacking casters for medium and heavy-duty loads are designed to facilitate movement and quick, accurate adjustment of working platforms, machines and other applications. The JA series casters are available in sizes of 6", 8" and 10" wheel diameters with load capacities from 400 to 2,496 kg. The 6" and 8" models have a screw jacking system with a 3" lift independent of the swiveling action. The 10" model has a 6" lift and features a two-way directional lock with travel at 90 degrees to the vertical fixing plate. All models feature an electrostatic-sprayed black matte finish.

Kingmar Associates

The RSC series of rod cylinder slides includes a choice of linear ball and composite bearing models in 5 bore sizes from 20mm to 50mm. Stroke lengths for each size are available, off-the-shelf, in one-inch increments up to 12 inches. The RSC series includes several unique standard features which include: ISO style repairable cylinders with integral air cushions and dowel pin locating holes on the tooling  plate and slide body. On composite bearing models, oversized guide shafts are also standard. Guide rods on the RCS series are made of precision ground, hardened steel.

Tol-O-Matic

The TEMPEST variable speed electric fans available in 16", 18" and 21" sizes with volumes up to 13,920 cfm. Using electric motors eliminates the problems caused by gasoline, oil, Carbon Monoxide and small engine maintenance.

Canadian Safety Equipment Inc.

The Stopcock valve is manufactured for use in low and medium pressure lines using fluid or gas. They are suitable for vacuum and pressure applications up to 50 psi and feature a through-flow design that limits restriction through the valve stem. The larger openings reduce turbulence and guarantee virtually no drop in pressure. The valve body is clear polycarbonate with a white HDPE stem. The valve stems can be colour coded in black, red, green, blue and yellow. A variety of combinations are available. The stem rotates 360° allowing for shutoff of flow to one port every 90°.

Ark-Plas Products, Inc.

DuraPail bulk melters deliver simple, low maintenance application of hot melt adhesives, sealants and butyls from 20-liter or 5-gallon pails for product assembly operations. Standard features include manual pressure control and blow-off valves. Easy-to-use controls and status at-a-glance indicators further simplify programming and operation. A 7-day clock allows automatic daily startup and shutdown. The rugged, flexible design offers choices of gear pumps and preset fixed motor speeds to meet varied production output requirements. Operation is made easy with handgun trigger connections and single-side access for controls and pail changes.

Nordson Corporation

These two anti-seize lubricant products in semi-solid stick form simplify and improve industrial maintenance. Convenient and portable, Loctite® C5-A® Anti-Seize Stick is a copper-based lubricant that shields against high temperature seizing and galling. It can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics, and all non-metallic gasketing materials. The Loctite® Silver Grade Anti-Seize Stick is a heavy-duty, high temperature anti-seize thread lubricant with a smooth texture suitable for protecting fine threads, snug slip fits and other closely mated parts. Typical applications include boiler and oven parts, jet engines and industrial turbines.

Henkel Loctite Corporation

Stafford Metric Shaft Collars and Couplings are available off-the-shelf to provide machinery builders with fully metric components for compatibility with any equipment sold and serviced worldwide. Featuring a wide range of sizes in steel and stainless steel, the collars come in 1-pc, 2-pc, and hinge styles and the rigid couplings are offered in 1-pc and 2-pc styles. Supplied with metric socket cap screws, the shaft collars come in 24 sizes from 3 to 75mm I.D., in 1-pc and 2-pc styles, and the hinge collars and couplings come in 16 sizes from 6 to 50 mm I.D.

Stafford Mfg. Canada

The ProFleet™ fleet management software is designed specifically for tracking warehouse lift trucks and related equipment. This software is for warehouse maintenance managers, operation managers and anyone else who wants to track and reduce overall fleet costs. It is designed to help customers reduce operating costs by knowing exactly how much they are spending and where they are spending it. ProFleet captures parts and labour costs by truck and generates easy-to-use truck utilization, cost per hour and scheduled maintenance reports. All data entered reside in management Access files, which allows for unlimited user-defined queries.

The Raymond Corporation

Canadian Industrial Equipment News September 2004

Back to Contents