The RX series ThyRex is a new industrial product for solid state switching of AC loads up to 32A at voltages up to 480VAC, when controlled by 4-32VDC or 24-275VAC. ThyRex is an extremely compact -- 76 x 22.5 x 43mm -- solid state relay (SSR) that enables space savings up to 35% in the control cabinet. It has a base module that allows the user to choose from different cable securing methods, depending on the user's preference: screw terminals, spring terminals or FAST-ons.

Carlo Gavazzi (Canada) Inc.

Fluke has announced a free firmware upgrade for its popular 430 series power quality analyzer. With version 1.10, Fluke series 430 owners can expand their measurement capabilities and increase the speed of using the tool. The new capabilities provided by the upgrade include programmable ratios for metering and high voltage applications using secondary CTs and PTs. When coupled with the new i5s 5A current probes, you can easily verify revenue meters with a simple manual pulse count button.

Fluke Electronics Canada

The 74600 series of universal electronic dimmer switches enables panel and vehicle interior lights to be set at varying intensities. Ideal for a variety of vehicle applications, the switches are available in sealed case with O-ring seal in the shaft. Imprinted with SAE variable symbol, these universal switches come with a variety of terminations: wire, AMP connector and Packard connector.

Cole Hersee Co.

The CF14 is designed to withstand millions of cycles at a small bending radius --10 times the outer diameter or even smaller, depending on the application. It is ideal for continuous-flex applications in constricted spaces. The C14 CAT 5 cable has the capability to transfer 100mbps while the CF14 CAT 6 can transfer as much as 250 mbps. These levels are required for communications equipment and other types of computer and electronics applications. The Chainflex CF14 CAT 5 cable is available with four twisted pairs of conductors and an outer diameter of approximately .21 or .41 inches. The CAT 6 version is available also with four twisted pairs and an outer diameter of .39 inches.

igus, inc.

UL-APPROVED DEVICE
for electrical panel inspections

Viewport is an UL-approved device to allow closed-door infrared inspections of electrical panels. Matched with the SpyGlass™ fisheye lens, it allows an inspector to scan a panel by looking through a single port's tiny 0.62" opening. Designed to make frequent inspections more convenient, the Viewport enables a thermographer to work without the help of an electrician or safety barricading, and with minimal personal protective equipment. The Viewport is also suitable for use with ultrasound detection equipment.

Mikron Infrared, Inc.

The Powerware 9155 is a new, double conversion online, 8,000 -- 15,000 VA uninterruptible power system. Its slim and modern tower design produces a high level of protection from power disturbances for critical equipment while saving space in server rooms where floor space is scarce. By delivering a 0.9 output power factor, the unit can easily accommodate today's high power factor load requirements and is well suited for modern servers and computer loads. Front access for all services and operations provides increased installation flexibility, while increasing serviceability and reducing repair time.

Eaton Corporation

Belden has expanded its line of variable frequency drive (VFD) cables for industrial AC motor drive applications. Line additions include five Large AWG Symmetrical VFD cables and five new Signal Brake Pair VFD cables. In industrial settings, VFD cables are used to carry power from AC drive systems to AC motors. The Belden series of VFD cables now includes: Large AWG VFD Cable with Symmetrical Design, Signal Pair VFD Brake Cables, Classic Series VFD Cables. Thicker, industrial-grade XLPE insulation provides lower capacitance and more stable electrical performance and heavy-duty PVC jackets ensure oil and sunlight resistance.

Belden CDT Electronics Division

A new range of D-subminiature connectors with superior sealing allows them to operate reliably in harsh conditions, including submersion in water or corrosive materials. Cannon Grommet D can be used in applications as diverse as aviation, marine, chemical/petrochemical processing, medical devices, food processing, automotive and heavy industrial equipment.

ITT Electronics Components

DC/DC CONVERTERS
for space critical applications

The A1100RW series is a family of single and dual output 10W DC/DC converters, The series provides 10W of output power from a compact DIP package and is suited for space critical board level applications requiring moderate power levels and tightly regulated, isolated outputs. Each model is specified for operation over the wide operating temperature range of -40°C to +60°C ambient (+90°C case) with no derating or heat sinking required. Cooling is by free-air convection.

MicroPower Direct

The next generation AMP PACE card edge connectors are based on .100" x .200" centerlines and accept .054"­.070" daughter cards. Eye of the needle contacts accommodate simple, solder-free press fitting into a printed circuit board. Since this product is flat-rock compatible, no special tooling is required. The connectors are suitable for computer boards, communication equipment, industrial controls and machinery as well as test equipment and instrumentation. The connectors are available in 10 through 60 dual position sizes.

Tyco Electronics

The LTTJ compact current transformers are designed to mount directly onto most solid state relays. They provide a 0 to 10 Vdc proportional signal without the need for external power. Designed for use with both high and low impedance circuits, the LTTJ can be easily adjusted to provide the 0 to 10 Vdc signal over currents of from 0 to 10 amps to 0 to 100 amps. Other features available on the LTTJ include: NPN transistor output, LED display.

Love Controls

The SPD series switching power supplies are high efficiency, DIN Rail mount devices specifically designed for the automation market. The wide range of output wattages and voltages provide various choices for low power electrical or electronic devices. The power supplies feature compact dimensions, several output power ratings from 5 to 240 watts, and universal 90-265 VAC or 120-370 VDC supply voltages. They also feature diagnostic LEDs for alerting the user of when the output voltage is ready for use and in the event the output voltage is too low. All models also offer a potentiometer for fine tuning the DC output voltage.

Carlo Gavazzi (Canada) Inc.

ETCO custom electrical terminals can be manufactured from virtually all alloys including medical grade alloys, titanium, platinum, stainless steel and copper alloys in a wide range of configurations. Featuring inlaid brazing compounds to facilitate wire attachment in automated processes, they eliminate the costs associated with pre- and post specialized plating. Supplied loose piece or reel-to-reel, the terminals can be produced in sizes from 0.008" to 0.900" thick with +/-0.002" tolerances, depending upon materials and design requirements. Developed using rapid proto-typing with 3-D solid modeling analysis, these terminals can also be inlaid or edgelaid with precious metals for increased wear properties.

ETCO Incorporated

The series 101 snap-action rotary switch is available in two configurations with four-hole or single-hole mounting, depending on the application. Both models have continuous ratings of 20 amps at 600 volts. Designed to withstand shock, vibration, and other severe conditions, they have double-wiping, low-resistance contacts that maintain their set positions inside fully enclosed decks and deliver high-performance DC or AC switching. Its design assures quick make and break action that is not dependent on the operator. Contacts are enclosed in molded phenolic insulating disks, but to minimize resistance and heating, the stationary contacts extend outside the disks and serve as connecting terminals.

Electroswitch

Flexicon FPI corrugated nylon electrical conduit offers highly flexible, durable wire protection solutions, ideal for use in a broad range of OEM applications. The product line features fatigue- and impact-resistant operating life. Flexicon FPI protects current-carrying wires and cord sets from moisture, debris, insects and animals. It is resistant to everyday wear and tear, associated with repetitive motion in robotics, automation and other continuously flexing OEM applications. The conduit provides protection from oils, solvents, abrasives and ultraviolet light. It remains flexible and crush-resistant, making it ideal for use in wide-ranging, often severe applications.

Heyco Products, Inc.

A new line of high rate discharge batteries is suitable for Uninterruptible Power Supply and other applications that require maximized space utilization combined with high energy density. The cases and covers of the DataSafe HX line of valve-regulated lead-acid (VRLA) batteries uses a polypropylene compound that improves high temperature performance and increases vibration resistance. Five models ranging from 204 watts/cell to 506 watts/cell are available.

EnerSys

The SLL universal phase monitor/relay group protects motors, pumps and compressors against phase loss, over/under voltage, unbalance, incorrect phase sequence and is packaged in a combination surface and DIN rail mounting enclosure. The device accepts a wide range of voltage inputs (200-500 VAC), includes adjustable restart and fault delays and has the capability to monitor both the line and load sides of the circuit. Both Delta and Wye systems may be monitored.

ATC-Diversified Electronics

The new MADISON CABLE lead-free and heavy metal-free cables provide highly efficient interconnections for many applications while complying with most new and proposed environmental regulations. The cables are designed to meet applicable UL and CSA standards as well as any current applicable ANSI standards.

Tyco Electronics

Canadian Industrial Equipment News February 2006

Back to Contents