The Remote Access Sensor (RAS) includes a sensing transducer which is permanently mounted on a test subject such as a pump, motor, bearing or valve housing. It is connected to a cable, which can be inserted through a test port and attached to an Ultraprobe to data log and/or record sound samples for analysis. The RAS-MT is a magnetically mounted transducer assembly with cable, included with the Ultraprobe 10,000 and available as an optional accessory for the 9000. The accessory provides consistency while monitoring equipment condition and will operate in difficult-to-reach test points.

UE Systems, Inc.

The RJCS series current monitoring solid state relay is capable of switching 50-amp single phase AC loads at up to 660 VAC, when controlled by a 4-32 VDC signal. Its internal current sensing circuitry monitors and reacts to a number of load failure conditions. The alarm functions can be set locally or remotely from a standard PLC. Internal over temperature and over current protection is standard. The RJCS can be ordered with either NPN or PNP normally open or closed alarm outputs. The RJCS has an integrated heat sink and simply snaps to DIN rail.

Carlo Gavazzi (Canada) Inc.

The new Telemecanique Zelio Time electronic timers are designed for all hard-wired, logic, automated systems complementing PLCs. Wiring and timing diagrams are located on the relay side to facilitate installation. These timers are suited for automotive, machining, conveying, packaging, mining, petrochemical, sawmills, pulp/paper and waste/wastewater applications. These ergonomic and configurable timers are available in three versions: the modular RE11, the industrial RE7 and the panel-mounted RE48.

Schneider Electric

FLIR announces new thermal imager post processing and automatic update capabilities as standard features on the BCAM™ thermal imager. This new functionality will allow users to make any temperature measurement of any pixel after the image has been saved. New QuickView™ 2.0 thermal imager software allows the user to select different colour palettes, level and span, or even a moving spot locator to zoom in on your target area. FLIR is also offering automatic web updates for its QuickView™ 2.0 thermal imager software.

FLIR Systems, Inc.

The EZTherm XP™ IR Image Fusion Camera allows camera operators to mix thermal and visible images into fused real-time video. Its powerful image fusion function gives users the ability to mix infrared and visible imagery into real-time fused video making it easier to visualize temperature related problems in a wide range of objects. User-friendly controls allow the operator to adjust between 100% thermal and 100% visible and new auto-thermal scaling enables the display of thermal detail within a user-specified temperature range overlaid on high-quality video.

Hyatt Industries Limited

Power-Core™ composite worm gears replace industry-standard bronze gears in demanding operations to increase transmission efficiency with quieter performance. The material does not require special grade oil or frequent oil changes and the composite material does not generate abrasive particles which become suspended in the oil as a contaminant that contributes to wear. In applications such as conveyors for glass washing or light load semi-conductor manufacturing machinery, the worm gears run with only light grease or completely dry.

Intech Corporation

IndX Software has introduced a comprehensive Oil Field Management Intelligence Pack for its XHQ™ real-time performance management system. The Pack is a pre-packaged, role-based, upstream operations performance management system that provides proactive notification of current and emerging problems helping production supervisors and managers make better informed decisions about upstream assets and respond to situations in real-time.

Siemens Energy & Automation Inc.

The R58 Expert™ Series colour register mark sensors are designed to detect colour contrast in common product and material registration applications. The R58 Expert accurately detects 16 levels of gray scale by automatically selecting the sensor's red, green or blue LED, based on the contrast of the background and the registration mark being sensed. Its ability to perform up to 10,000 actuations per second, coupled with its small 1.2 x 3.8 mm sensing image, makes the R58 Expert suitable for detecting small, inconspicuous marks in low-contrast, high-gloss sensing applications.

Banner Engineering Corp.

The flexible design of SOR instruments includes five ranges of pressure switches spanning full vacuum to 4000 psi which reduce inventory stock. Numerous housings, including weather-tight and explosion-proof can be specified. This flexibility of design and the custom-engineered nature of all SOR switches allows customers to individually match the instrument to their process. Process connections are available in sizes from 1/4" to 2", male or female threads, SAE or NPT and brass, aluminum or stainless steel.

SOR® Inc.

The new spring balancer for use with assembly tools allows the tool operator full access to the work area without tool interference. It will retract completely or can be easily adjusted to retract a tool partially to suit the operator. The spring balancer helps reduce operator fatigue and improve efficiency by keeping tools at an ergonomic height. Additionally, it will reduce the chance of workpiece damage by keeping the tool away when not being used. The ASG spring balancer is ruggedly constructed and has been tested to 950,000 cycles.

ASG, a division of Jergens Inc.

Setra's model 235 is designed for differential pressure measurement of liquids or gases in applications with high line pressures up to 2500 psig. It is accurate to +/-0.18% of full-scale output with a total error band of +/-0.5% full-scale over the compensated range of -20° to 160°F on 5 psid through 500 in. W.C. pressure ranges. The unit is offered in a choice of 4 to 20 mA or .05 to 4.5 VDC output with pressure ranges as low as 2 psid up to 500 in. W.C. and choice of all stainless steel housing with cable termination or aluminum housing with terminal block.

Alpha Controls & Instrumentation

The R-Series Synchronous Serial encoder (SSI) Interface position sensor includes options for synchronized 7500 kHz update rates and position accuracy as low as +/-20 microns. Its proprietary synchronization technology guarantees accurate position output while minimizing inherent system-related delays to produce smooth, precise velocity loop control. An internal measurement error-checking routine ensures high immunity to shock and vibration.

MTS Temposonics

TOL-O-MATIC's BC series of pneumatic band cylinders features Endurance Technology™ which assures long life in the most demanding applications. BC Series cylinders feature a patented stainless-steel band, rigid extruded aluminum tube and internal air cushioning. In addition, the load is supported through the entire stroke, keeping seal wear to a minimum. The BC4 features a patented floating bearing system that is self-lubricating and runs the entire length of the carrier for maximum bearing surface.

TOL-O-MATIC

The BSD-1838 14 volt T1-1/4 Twist Lock Base Mount Neo Wedge Bulb may be used in many instrument panels. It is available in dazzling yellow or vibrant red allowing versatile lighting for many applications such as dashboards, air conditioning indicators, button lamps, gauge illumination, warning markers, headlight switches, PC board lamps. The LEDs emit colours at 14V at a viewing angle of 125°. Both LEDs are highly durable and reliable and require no socket. Installation can be done using an easy twist-to-lock method to ensure a secure electrical contact.

LEDtronics, Inc.

Renishaw extends the motion analysis capabilities of its ML10 laser calibration system to give engineers continuous "streaming" data on machine dynamics, viewable on a live oscilloscope-type display. A new, simple-to-use and intuitive software package, QuickView™ enables real-time, high-resolution motion analysis of linear or angular positioning accuracy, velocities or accelerations.

Renishaw Inc.

Lenox rigid boroscopes provide remote visual inspection in a variety of industrial and commercial applications. The unit identifies details and flaws as small as 0.001 inch. With intense fiberoptic illumination (standard) and a variety of probes (direct, forward oblique, to-the-side or retrospective), magnifications and field of view available, any type of cavity can be easily and effectively probed.

Lenox Instrument Company

The Touch Screen Graphic User Interface provides complete inventory control in manufacturing inventory management, storage and retrieval applications. The fully integrated touch screen controls eliminate the need for any additional hardware or components. This provides employees with immediate access to stored items which increases throughput and employee accuracy. With the Touch Screen GUI, industrial users can store and retrieve items from Vertical Lift Modules and vertical carousels with a simple, user friendly touch screen interface. The touch screen interface allows for automatic retrieval and storage of items while the software tracks inventory levels per Stock Keeping Unit per location.

FastPic Systems

The EZ-mix® VR variable ratio meter-mix dispense system features four piston pumps that can each achieve pressures >2000 psi and provide a continuous, seamless flow of material from any size reservoir. Capable of dispensing highly abrasive and viscous materials, each pump can have a stainless steel piston, hard-coated steel cylinder walls, and Teflon® seals and ceramic valves. Designed to dispense a continuous, uniform bead with 0.1 ml accuracy, the dispense system eliminates interruption from refilling.

DTIC Dispensing Technologies

Built for tough applications, the NORDAC SK 500E and 520E inverters feature high torque, rapid response and wide speed range for extended power outputs ranging from 0.25kW to 7.5 kW. Available in sizes between 7.32 x 2.99 x 5.94 inches and 11.26 x 3.86 x 7.01 inches, both models offer a package which contains all standard drive functions, allowing for smooth integration into almost any automation environment. The inverters also feature selectable modes for sensorless vector control that provides a high-starting torque and precise control.

NORD Gear Corporation

Uhing has modified one of its five model AZ timing belt drives to better resist build-up of dust, metal filings and other airborne particles. The load carriage in the model AZ-2000 timing belt drive now features plastic slide bearings instead of the metal rollers standard on other Uhing timing belt drives. Developed specifically for use in the paperboard manufacturing industry, the belt drive is also recommended for other applications subject to airborne contaminants including grinding, sanding, cutting and polishing.

Amacoil Inc.

The 58KS1 high power-density, single card slot, VME64 DC/DC converter provides up to 75 watts of output power at full load over its operating temperature range of ­40°C to +70°C. It operates with a +5.0Vdc input and provides a +3.3Vdc output. The 58SK1 plugs into a standard VME64 backplane. It is suited for military and aerospace programs, including airborne, shipboard and ground mobile.

Integrys Limited

Two new series of round urethane vibration isolators are designed for use in severe environments where they may come in contact with oils, chemicals, ozone and/or ultraviolet light. These highly damped units, identified as the V10Z60 series, exhibit low amplification resonance and quickly return to system equilibrium after any shock or vibration input. All units are made of urethane, with a durometer of 24 of 5. Zinc plated steel fasteners are bonded to the main isolator section.

Advanced Antivibration Components

Certidata has launched an ISO software suitable for any sized company. Within one 40-hour week, a business can document the entire 20 key ISO processes. You simply install and run the software; toll-free technical support is included. Each ISO requirement comes with a detailed explanation along with questions and samples of compliant answers. The sample answers can be used verbatim, or can be edited or rewritten to better describe a company's processes. Once a company's procedures are documented, with the click of a mouse Certidata software publishes the final document.

Certidata Corporation

Moyno offers various, proprietary Ultra-Shield™ rotor coatings to assure peak performance under highly abrasive and/or corrosive service conditions. The Ultra-Pro™ rotor/stator configurations allow end users to optimize or upgrade their Moyno pump flow rate and pressure capability to match application requirements. Various Ultra-Drive™ drive train configurations are designed to handle the torque transmission of even the most demanding applications. The extensive list of Ultra-Flex™ stator elastomers is formulated to meet specific fluid conditions for peak operating efficiency, longer life and less maintenance.

Moyno, Inc.

The GLM20 complete 1-axis positioning system offers high acceleration/deceleration and low noise levels. It is capable of operating at speeds up to 4 m/sec and 2G and achieves accuracies of 1 micron average or better. Use of fully closed control with a direct drive and an optic linear encoder achieves high accuracy without motion loss and backlash. The Type GLM20 provides 3000N (674 lb-f) of continuously useable linear force. An instantaneous peak-linear-force of 4500N (1011 lb-f) is also achieved. Multiple sliders are installed on a single-axis base to allow sliders to be individually controlled.

THK

Kurt's MultiChuck MMY Concentric Clamping System product line consists of manual self-centering static workholding for machining centers, milling machines and grinders. The MMY provides a simple top face operation that enables more chucks, and therefore more workpieces to be "banked" closely together. Available for external or internal clamping which satisfies both first and second operations in the same machining cycle and provides continuous output of finished components.

Kurt Manufacturing Company

The FAG Detector III is a user-friendly mobile instrument for early detection of vibration, temperature and balancing problems in rotating components. The new device offers an improved mobile condition monitoring function (measurement of temperature and vibration), along with an option for static and dynamic balancing. The enlarged memory of the Detector III permits users to record up to 1,600 measuring points plus up to 270 time signals per inspection round for condition monitoring purposes. This means that bearing damage, imbalance and misalignment are recognized quicker and more reliably. Due to the balancing function, any imbalance detected can be eliminated directly and easily.

FAG Bearings

The CTS Connect™ air actuated internal or external connectors are designed for effective sealing on smooth, rough or threaded circular features of a part creating a tight, long-lasting seal. The connectors consist of an air-driven internal piston that compresses the urethane seal material against the surface shape or finish. The CTS Connectors are ideal for leak testing, filling, cleaning, burst or pressure testing, flushing, charging, integrity, sealing and part handling in a variety of industries including automotive, medical, appliance, consumer goods, industrial, hydraulic, HVAC and military.

Cincinnati Test Systems, Inc,

Chemineer's gearbox refurbishing program eliminates frequent maintenance and costly downtime. It provides off-the-shelf, refurbished gearboxes to quickly replace units that are requiring frequent maintenance, experiencing excessive downtime or are in need of replacement to improve efficiency. Refurbished sizes 10 - 12 are available.

Chemineer, Inc.

The Series S-4 weatherproof surface temperature assembly contains a rugged steel enclosure with a fast response temperature sensor for monitoring pipe surface temperature. This unit is designed for harsh applications where dirt, condensation, oil, vapour and other contaminants may be present. The rugged powder-coated steel enclosure meets NEMA 4 (IP-65) requirements. The series S-4 includes a low profile brass sensor insulated from the enclosure for accurate temperature measurements.

Dwyer Instruments, Inc.

MSA Custom Products offers individually designed solutions to customer problems. Their custom gas detection and flow systems are built to customer specifications. The systems can be wall-mounted, rack-mounted or in freestanding cabinets. The group also designs systems for hazardous area applications. For the detection and monitoring of combustible gases, toxic gases and oxygen level, electrochemical, catalytic bead, solid state and both photoacoustic and non-dispersive infrared (IR) technologies are available.

MSA

Canadian Industrial Equipment News September 2006

Back to Contents