The UT-100Si-TC Ultratorch® Professional Heat Tool Kit features the UT-100Si Ultratorch, a self-igniting, butane powered, multi-functional soldering iron, flameless heat tool and hot knife. The kit also contains three Ultratip® soldering tips (including a high-powered chisel tip for use with thicker gauge wires), a hot knife tip, hot air tip, heat shrink reflector, wire cutter, needle nose pliers, roll of 60/40 solder, sponge, cap and stand all packed in a sturdy, compact plastic storage/carrying case. Applications include soldering and desoldering, removing surface mount components, heat shrinking tubing and specialty connectors, repairing vinyl, spot drying and cutting materials. The Ultratorch features adjustable temperatures up to 500°C and a self-ignition button and built-in fuel filter for easy and consistent starting.

Master Appliance Corp.

The V18™ 1/4" Hex Impact Driver delivers 2,600 rpm, 1,400 in/lbs of torque for a wide range of driving and fastening applications such as steel framing, HVAC and facility maintenance. With an all-metal gear and impact mechanism and a variable speed trigger, it ensures maximum durability and allows for output power control. Added features include a built-in LED light for illumi nating dark work spots, a fuel gauge on the battery pack to accurately display remaining run-time, an overmold handle that reduces operator hand fatigue and on-board bit storage for frequent bit changing.

Milwaukee Electric Tool Corporation

Dynabrade introduces a unique Comfort Platform, which provides additional hand and wrist support for the tool operator, and is now standard on all palm-style Dynorbital-Spirit and Dynorbital Supreme random orbital sanders. It also effectively protects the hand from contact with the air coupler and connector, and further shields against air exhaust. A Comfort Platform Conversion Kit for these tools is also available.

Dynabrade, Inc.

The Hi-Viz tool box caddy provides mobility for the Klein® Hi-Viz sit/stand three-tier tool box enabling users easy access to tools on the jobsite. The caddy has durable wheels and an axle that are tough enough to withstand rough, uneven surfaces common on jobsites. The wheel caddy locks into position and can be maneuvered by a telescoping handle with comfort foam grips.

Klein Tools

Kraftform® Screwdrivers from Wera provide comfort and utility for the professional user. The ergonomic handle is shaped so that every muscle can grip. The whole hand is in contact, which facilitates higher torque transfer with less effort. Hard zones on the handle rotate through the hand like wheels when the hand is repositioned. The net result is more torque and speed; less hand fatigue. Extra fastening efficiency is supplied by the Lasertip® blade, a laser-etched drive end that is extremely sharp-edged and wear resistant. Tight-fitting to the screw head, it reduces cam-outs; the amount of contact pressure required for fastening, and the chance of injury to products or users due to blade slippage.

Wera Tools Inc.

The new Torq2™ HBP Series pistol grip drivers are available with torque ranges from 2.6 lbf/in to 156 lbf/in. A patented clutch design automatically stops the tools when designated torques are reached. Torques can be adjusted by authorized personnel via a torque nut. Anti-tamper covers are provided. The new drivers feature an ergonomic design that provides operator comfort and gripping power. Most drivers come with a series of five colour-coded caps, which can be inter changed for quick operator visual reference of a driver's torque and reduce tampering. A quick change collet facilitates bit changing.

Jergens, Inc.

The SBE610 hammer drill features a robust die-cast aluminum gear housing for increased durability, improving the tool's dissipation of heat and increasing its service life. It offers fatigue-free and comfortable operation when working with materials such as concrete, metal, wood, brick and tile. The hammer drill includes an innovative routing feature to circulate air downward and toward the front of the tool to re-route dust and debris away from the tool's motor and its user. Rated at 5 amps, with 5 Nm of torque and a no-load speed of 3,100 per minute, the tool provides a maximum drilling diameter of 1/2" in concrete, 3/8" in steel and 3/4" soft wood.

Metabo

The Hilti X-U Universal Fastener is suitable for countless demanding applications, including fastening wood, wall ties and installing suspended components to concrete or steel. With a fully knurled nail tip spanning 22 millimeters on all fastening lengths, the X-U achieves a reliable hold at reduced penetration depths. The twist design of the knurling results in a "screw" effect when using the nail, which helps ensure a secure hold and high loading capacity on steel.

Hilti (Canada) Corporation
 

The 14" metal cutting saw with dry cutting technology is equipped with a durable fast cutting Metal Devil® 14" carbide-tipped blade. The powerful low-speed, high-torque motor is optimized for metal cutting at 15 amps and 1,300 rpm for quick, clean cuts. The heavy-duty steel base provides stability with pre-drilled holes for easy bolt down to any work bench. With six preset markings in the base, the vise is quick and easy to set up for 45° or 90° cuts. A large cutting capacity allows a wide variety of materials to be cut.

The M.K. Morse Company

The durable, flexible borescope -- the CastingScope -- is designed to inspect metal castings and other rugged, hard-to-access areas. It features a renewable front probe: after thousands of inspections, the worn insertion probe can be easily replaced with a new one. These flexible instruments are capable of viewing the inner workings of complex castings such as cylinder heads and engine blocks. Images are then displayed on a colour monitor for operator comfort. The CastingScope is available with probe diameters of 3.5mm and 6 mm; probe length is 200mm or longer. Fiber optics are used for illumination.

Lenox Instrument Company

The "Gang Box Caster Kit" adds casters to a new mobile tool box or replaces the casters on an existing gang box, job box, tool box or work box. The heavy-duty, lightweight casters are specially designed to handle heavy loads and withstand hard impacts. Three caster kits are available, each including two swivel and two rigid casters plus 16 attaching bolts, with wheel diameters of 100mm, 125mm and 150mm.

The Revvo Caster Co., Inc.

The RC-1625 ratcheting plastic pipe and tubing cutter has a large capacity and has an advanced blade design that reduces the required cutting force. With a 1/2" to 1 5/8" O.D. capacity, the ratchet cutter easily cuts plastic pipe and tubing such as PVC and CPVC, as well as PEX, polyethylene, polybutylene and rubber hose. A quick-change blade pin enables users to change blades by hand in a matter of seconds. The quick-change pin also assures users that there will be no lost clips or screws during a blade change.

RIDGID

Stanley has developed a new ergonomic two-handed start solution that keeps the operator's hands away from rotating spindles and pinch points while using DC nut runners, especially tube nuts. A low force spring-loaded sleeve with a second switch allows the operator to grip the tool comfortably in any orientation. Both switches must be actuated within 500 meters for the tool to start. The option is available on any E23L through E55L QPM model. The two-handed option features a standard lever, along with an optional switch which must be engaged simultaneously in order to start the tool. By requiring that the operator use both hands to start the tool, potential injuries can be avoided.

Stanley Assembly Technologies

The MagSnips™ family of replaceable blade snip models feature easily replaceable blades and a light-in-weight cast magnesium frame. MagSnips® cut a variety of materials and the design includes left and straight cut models. The offset design flows material away from the blades allowing the snip to be easily advanced without interference from the material being cut and making it easier to cut long materials. The offset design also keeps the user's hand safely above the material being cut.

Midwest Tool and Cutlery Company

The 0490-22 4-volt lithium-ion screwdriver is designed for high-speed fastening with maximum control in small spaces. It is powerful, lightweight and compact for a variety of electrical, manufacturing and assembly applications. Featuring a two-position handle (pistol and in-line) to accommodate tight workspaces and awkward angles, it has a heavy-duty two-speed gearbox delivering 600 max rpm, and a 3.0 amp-hour lithium-ion battery for long life and fade-free power. A 21-position clutch features automatic shut-off, which stops rotation of the bit once desired torque setting is met, for improved torque control and offers a drill mode for drilling pilot holes or removing damaged screws. A snug bit grip prevents dropped screws when the screwdriver is inverted.

Milwaukee Electric Tool Corporation

IDEAL has enhanced its WireMan Cutting Pliers to feature the SmartGrip ergonomic, slip-resistant handle, resulting in improved tool safety, productivity and comfort. Re-engineered WireMan pliers feature sharp, knife-to-knife precision blades that provide control and strength when cutting a variety of wire types. Crosshatched jaws prevent slippage even while pulling heavily lubed wires, and a built-in crimp die and fishtape puller adds multi functions and convenience. Over moulded on the tool's handles, SmartGrip consists of two tiers of Santoprene. The first tier is a hardened formula that enhances comfort with its curved form factor. The second tier is soft and textured, providing a sure grip even when wet.

Ideal Industries, Inc.

Canadian Industrial Equipment News January 2008

Back to Contents